DRAG 2
Original price was: 23.000 د.ك.20.000 د.كCurrent price is: 20.000 د.ك.
The VOOPOO DRAG 2 177W TC Starter Kit continues the epic legacy of the original DRAG, presenting a highly intelligent GENE FIT Chip with multiple power output modes and an updated chassis to pair with the mesh-coil UFORCE T2 Sub-Ohm Tank. The DRAG 2 177W Box Mod is built with a modernized update to the original, implementing rounded edges for ergonomic handling and more resin dyed color options for a visually stunning display! The GENE.FIT Chip is dynamic and quite efficient with battery efficiency, with the addition of multiple output power adjustments such as Flavor Set, Cloud Set, and Battery Set. The UFORCE T2 Tank features 5mL maximum juice reservoir, ergonomic sliding top-fill design, triple-slotted airflow control, and the utilization of the mesh-capable UFORCE OCC Coil System.
VOOPOO DRAG V2 177W TC Box Mod Features
| Wattage Output Range | 5-177W |
|---|---|
| Voltage Output Range | 0-7.5V |
| Temperature Range | 200°-600°F/100°-315°C |
| Colours | Aurora, Flame, Ink, Platinum, puzzle |
- Dimensions – 88.3mm by 51mm by 26.5mm
- Dual High-Amp 18650 Battery – Not Included
- Highly Advanced GENE FIT Chip
- Resistance Range – Power Mode: 0.05-3.0ohms
- Resistance Range – TC Mode: 0.05-1.0ohms
- Supports Ni200, Titanium, Stainless Steel Compatibility
- TCR Adjustments Mode
- Battery Set
- Flavor Set
- Cloud Set
- Superior Zinc Alloy Chassis Construction
- Visually Striking Resin Inlay Design
- Intuitive OLED Screen
- Large Firing Button
- Mode-Setting Button
- Two Adjustment Buttons
- Magnetized Battery Door Cover
- Output Over-Current Protection
- Overcharge Protection
- Over Discharge Protection
- Short-Circuit Protection
- Over Temperature Protection
- Brand Reverse Protection
- Switch Timeout Protection – 10 Seconds
- MicroUSB Port
- 510 Connection
- Available in Island, Flame, Aurora, Puzzle, Dawn, Ink
Includes
- 1 DRAG 2 177W Mod
- 1 UFORCE T2 Sub-Ohm Tank
- 1 0.4ohm U2 Dual Coil
- 1 0.2ohm N3 Triple Mesh Coil
- 1 Spare Glass Tube (3.5mL)
- 1 MicroUSB Cable
- 1 Spare Parts Bag
- 1 Instructional Manual
- 1 Warranty Card
Before your first direct-lung draw
DRAG 2 is a direct-lung (DTL) device: an open draw straight to the lungs with dense vapour. It suits freebase e-liquid at lower nicotine strengths. Colours available: Aurora, Flame, Ink, Platinum, puzzle.
- Charge the device or fit the batteries, depending on the model, and check they face the right way.
- Fit the coil into the tank and drip a few drops of e-liquid onto the exposed cotton.
- Fill the tank and leave it for a few minutes so the cotton soaks through.
- Screw the tank onto the device, switch it on and start at the low end of the wattage range printed on the coil.
- Open the airflow, take a draw, and raise the power gradually until the flavour is where you like it.
- When it tastes burnt or the vapour drops off, change the coil.
Looking after your mod and coils
- Stay within the wattage printed on the coil; going over it burns the cotton quickly.
- DTL vaping uses more e-liquid and battery than MTL, so keep an eye on the tank level.
- Sweet and dessert flavours shorten coil life more than fruit and mint.
- Lock the fire button before the device goes in a pocket or bag.
- Wipe the contact point between tank and mod now and then to keep the connection steady.
Other kits built for direct-lung vaping are in our Vape section.
What wattage should I use with DRAG 2?
Wattage depends on the coil you have fitted, not on the device itself. Every coil has a recommended range printed on it, so start at the lowest figure and work up until the flavour is clear without any harshness. If you get a burnt taste, turn it down. Resistance and power are explained in What Is Ohm in Vaping and How It Affects Performance?.
How is a Vape kit different from a pod system?
A vape mod gives an open direct-lung draw with dense vapour and suits freebase at lower strengths. A pod system is smaller with a tight draw and suits salt nicotine. A mod uses more e-liquid and battery, but gives you more control over power and airflow. See what is available in our Vape section.
Why does DRAG 2 taste burnt?
Usually one of two things: the power is above the coil's range, or the cotton was not soaked before you drew. Lower the wattage, make sure the tank is filled, and give it a few minutes before drawing. If the taste stays, the coil is finished and needs replacing. Other problems and fixes in Top Common Vape Problems and Solutions.
What does a mesh coil do in a vape mod?
A mesh coil heats across a wider surface, so vapour and flavour come through evenly. Many recent tanks ship with mesh coils; what matters is that the coil matches your tank and runs within the wattage printed on it. The full explanation is in What Does Mesh Coil Mean?!.
How do I clean a vape mod and tank?
Remove the tank from the mod, take out the coil, and rinse the tank parts in warm water, drying them fully before reassembly. Wipe the mod's contact point with a dry cloth. Never rinse the mod itself. The complete routine is in Vape maintenance guide: How to maintain your device.
Delivery & returns
Ordering DRAG 2 happens directly on WhatsApp, with no account and no cart. Once you send your address, we set the delivery fee and arrange the order.
- Ordering: on WhatsApp 66908387 — send the product name or link.
- Delivery time: within two hours.
- Delivery fee: set once you send your address on WhatsApp.
- Areas: every governorate in Kuwait.
- Payment: cash on delivery, KNET, payment link, Wamd, Visa and Mastercard.
- Branch collection: you can collect your order yourself from our Salmiya branch.
- Age: sold to 21 and over only.
Returns and exchanges
- You have the right to return the product within 14 days from the date of receipt if it is defective or does not match the advertised specifications, or if it is unsuitable for its intended use.
- The product must be in its original condition (unused) with all its packaging and documents intact, including the invoice, and proof of purchase must be provided.
- In case of a defect or flaw, we exchange it for a similar or identical product within 7 working days from the date of request approval; if it is not available, you can choose a refund or another product of similar value.
- Refunds go back via the original payment method within 5-7 working days after the product is inspected and the conditions are confirmed.
- The refund policy does not apply if the product was misused or damaged by the customer, or if proof of purchase is not provided.
- The customer bears return shipping costs if there is no defect; the store bears all costs if the product is defective.
To request a return or exchange, message us on WhatsApp 66908387 with the invoice number and product photos if needed.
Shipping to Saudi Arabia
We ship DRAG 2 to Saudi Arabia, and the order runs on WhatsApp.
- Destination: shipping is available to Saudi Arabia.
- Transit time: the shipment arrives within a week.
- Cost: shipping is priced by the shipment's weight and quantity.
- Ordering: send your order and address on WhatsApp 66908387 and we confirm the shipping cost before you commit.
Related products
Linvo Neon 40000 Puffs
4.500 د.ك
JUUL2 Device
8.000 د.ك
Uwell Koko G3 Lite Pod Kit 1200mAh
7.000 د.ك
Reviews
Clear filtersThere are no reviews yet.